Connect with us

Stun Gun PCB Design

Discussion in 'PCB Layout, Design and Manufacture' started by eren581, Aug 16, 2013.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. eren581


    Mar 31, 2013
    Hi I am interested in electronics as hobby and I've just downloaded the e-book 50 555 circuits. I saw the schematic for the 555 stun gun. I want to apply it on PCB. I used the Eagle CAD to do PCB drawing of the circuit and I want you to check if it works when I apply it on PCB. I attached the files. This is the first time I'm trying to do it.

    Notes: I added a via nar the pin 5 and the 100 nf capacitor to connect them each other. I didn't valued all of them. I add the image for who doesn't have the Eagle software.
    I am waiting for your help :)


    Attached Files:

  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    We're not going to help you with a stun gun.

    Try with some other project and we will.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day