Connect with us

Stopwatch question(build)

Discussion in 'Electronic Design' started by PeacepPipe, Feb 3, 2004.

Scroll to continue with content
  1. PeacepPipe

    PeacepPipe Guest

    Hi I need help in building a stopwatch Crystal stopwatch
    how do i go about doing this? the stop watch would have features of 1/100
    and Up to 60 minutes,It would have large numbers Like from the Company
    accusplit.Numbers would be 1/2 Inch to 1 full inch and the watch would be able
    to be held in one's Hand "hand-held'

    but heres' the real question Now most watchs have a gray backround,with dark
    black digits as most watchs do..Now is there a chance where i can change the
    color of the digits to a color lets say BLUE? with the backround being,of
    course Gray
    Thanks
     
  2. You should search for a kit unless you have a bit of experience. This isn't
    a 2 hour project. Here is one kit. Its kinda expensive. I'm sure there are
    many of these waiting for you out in google-land.

    http://electronicsusa.com/ck4000.html

    Regards,
    Bob Monsen
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-