Connect with us

Stereo to 2-channel mono

Discussion in 'Electronic Design' started by JK, Aug 4, 2011.

Scroll to continue with content
  1. JK

    JK Guest

    I'd like to make a small male/female patch-cord that would passively
    mix-down stereo headphone output to two-channel mono.

    Assuming typical MP3 player drive levels, is this circuit OK?


    Plug > -- to -- > Jack
    ~~~~ ~~~~
    Left __[R1]___.__.__ Left
    Right __[R2]___| |__ Right
    Common _______________ Common

    R1 = R2 = 1000 ohms


    Thanks for any advice!

    ..
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-