Connect with us

Stepper motors. No longer needed

Discussion in 'Hobby Electronics' started by L.A.T., Dec 11, 2008.

Scroll to continue with content
  1. L.A.T.

    L.A.T. Guest

    I have some Slo-Syn stepper motors. They range in size from NEMA23 to one
    the size of a stubbie that would rip your arm off. They are low resistance
    motors that need a chopper circuit to drive them, and I have two of those as
    well. They are twenty years old and were part of a CNC prototype that I
    made. These things are all but indestructible and are reliable. They cost a
    packet. They have sat in a box for fifteen years and it is time they found
    as new home. They are heavy, of course, so postage would be expensive. If
    you can give them a good home, email me.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-