Connect with us

Standard SMT LDO 3.3V Voltage Regulator package?

Discussion in 'Electronic Components' started by Steve, Jan 13, 2005.

Scroll to continue with content
  1. Steve

    Steve Guest

    Hi,

    I've been spending loads of time trying to find a suitable 3.3V regulator
    for a new design. Requirements are: +3.3V nominal (no great accuracy), min
    100mA, 1.5V max dropout, surface mount, low cost (25 cents at 1k quantity or
    near).

    There are loads around but each one I've found comes in a different package
    or pinout. I want to find a package and pinout that is common across
    multiple manufacturers (just like the 7805 is for 5V (leaded though I
    know)).

    Is there a common surface mount package available to those pretty open specs
    that is made by multiple manufacturers?

    Many thanks.
    Steve
     
  2. Guest

    I've been spending loads of time trying to find a suitable 3.3V
    regulator
    I would think TO-252.
     
  3. Steve

    Steve Guest

    Many thanks. Do you have an example in mind? I'm trying to find a standard
    pinout too (every possible pin configuration seems to get used for some
    reason!)

    Steve
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-