Maker Pro
Maker Pro

Stand alone camera

J

J Barnes

Jan 1, 1970
0
I need some ideas for a mobile camera system. The camera will need to be
able to send live feeds back to a network. The camera will also need to be
mobile and self contained. I seen some systems like this that were mounted
to trailers at the ISC show. I dont remember who made these or if I could
get a live network feed from them. Is anyone here using these types of
systems or any other similar to it?

James
 
R

Rich

Jan 1, 1970
0
You bring up many questions. Cameras are simple 12 volt to 110 volts.
There are self contained network cameras with the range of most pocket.
Connecting to the network can be a problem.
1. Hard wired cat 5, not to mobile.
2. Wireless to the network card low cost short distanced 200 Ft
3. Wireless to a receiver expensive and more distance 1,000 Ft
4. Radio to radio super expensive 2-10 miles.
 
J

J Barnes

Jan 1, 1970
0
I would need a range of 5 to 20 miles and the feed would need to support
about 10ips. I understand we are talking about thousands of dollars but I
still need a solution. I could use 12 volt cameras but I would need either
an onsite DVR or a NVR to feed the video to a remote server.

James
 
Top