Connect with us

SSR's on lower voltages

Discussion in 'Electronic Basics' started by Peter, May 20, 2004.

Scroll to continue with content
  1. Peter

    Peter Guest

    Can a 240V SSR be used to switch voltages below that? eg. 110V, 24V etc?
     
  2. Yes. Keep in mind that any SCR drops about 1.2 to 2 volts regardless
    of its voltage rating. This is a lot more significant when switching
    24 volts than when switching 240 volts.
     
  3. CFoley1064

    CFoley1064 Guest

    Subject: SSR's on lower voltages
    Hi, Peter. The data sheet for the SSR specifies maximum and minimum voltages,
    as well as maximum and minimum current. I believe most 240 VAC SSRs are
    specified to switch 24VAC.

    http://www.crydom.com/pdf/crydom_cs.pdf

    Good luck
    Chris
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-