Connect with us

Speaker has 4 ohm tweeter, 8 ohm mid-woofer, how much ohm should receiver have ?

Discussion in 'Electronic Design' started by Skybuck Flying, Aug 12, 2009.

Scroll to continue with content
  1. Hello,

    Suppose a speaker has the following specifications:

    (input resistance:)
    8 ohm mid-woofer + 4 ohm tweeter + crossover board.

    The receiver has 6 ohm and 8 ohm.

    Is this a good match ? or will the receiver be damaged by the 4 ohm tweeter
    ?

    Please advice.

    Bye,
    Skybuck.
     
  2. Test it out. Afterwords you can lawsuit the manufacturer because he does not
    specified this in the manual.
    That what you always want to do.


    Please.... Don't feed this TROLL (his spam will never end)
     
  3. The receiver will have 6 year warranty, so if it dies before that then it
    should not be my problem anyway...

    Just trying to save the world from destruction ! ;) :)

    Bye,
    Skybuck.
     
  4. Vonkenboer

    Vonkenboer Guest

    TROLL ALERT

    Skybuck Flying had uiteengezet :
     
  5. PA10403-Gerard schreef:
    Please don't crosspost in dutch languaged newsgroups!
     
  6. Put your dick in a mid-woofer that's my advice.
     
  7. Guest

    It should work because my JBL towers have a 3ohm tweeter with 8ohm woofers and the system is 8ohms
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-