Connect with us

Spa

Discussion in 'Electronic Repair' started by dakspop, Jun 11, 2005.

Scroll to continue with content
  1. dakspop

    dakspop Guest

    Hi,
    I have a cascade spa running on 240V. It has started indicating a high
    temp/pressure error after the jets are on for 10 seconds or so. I took
    the pump apart and the impellor looks fine. Any thoughts on what I
    should replace?
    Thanks
    Jeremy
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-