Connect with us

source for VCR belts

Discussion in 'Electronic Repair' started by Dave, Aug 9, 2007.

Scroll to continue with content
  1. Dave

    Dave Guest

    I am looking for a source for belt(s) for a GE model VG4274 VCR, circa 1995.
    I'm in Canada.

    Any replies greatly appreciated.

  2. JR North

    JR North Guest
  3. vey

    vey Guest

    When this happened to me I couldn't find a belt, so I used a rubber
    band. Worked for 5 more years with no trouble. Finally junked it and it
    was working fine when I did. If you do this, make sure that very little
    stretch is required to put it on because you don't want to wear out the
    bearings by having the rubber band pulling on them.
  4. JR North

    JR North Guest

  5. Radiosrfun

    Radiosrfun Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day