Maker Pro
Maker Pro

Sound activated switch

monte

Aug 20, 2017
1
Joined
Aug 20, 2017
Messages
1
I have a 110V solenoid valve that i want to activate from a sound activated switch. The switch needs to have a timer which will allow it to shut off quickly (1 or 2 seconds). I have found ones that run off 9 volt batteries or low volt,but this needs to control the 110V valve. Does anyone out there have any experience with this type of switch or any suggestions??
Thanks
 

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
Welcome to EP!
Post a link to the 9V switch spec or datasheet and someone here should be able to suggest a way to interface the switch to the valve.
 
Top