Maker Pro
Maker Pro

SOS

idham85

Aug 19, 2011
3
Joined
Aug 19, 2011
Messages
3
Hello everyone,

I need to make an electronic card for connecting to a printer as the principle of SMS-printer. This card contains SIM card as it receives an SMS message is then transferred to the printer to print it.
Can someone help me? I do not know where I begin and how?
I am at your disposal for any further information.
Thank you in Advance
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
You need between 99% and 110% of a mobile phone. Maybe there's an app for Android phones that makes this possible?
 

idham85

Aug 19, 2011
3
Joined
Aug 19, 2011
Messages
3
thank you for your attention but the problem I need to design and produce this card without the use of another module ready. If you can help me level diagram, architecture, patterns etc. ...

Help me if you can;
 

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
Sms card printer reader

Thats a tall order i think even for a seasoned electrical engineer, build a sms/card/ printer reader interface from scratch, i wish you good luck with that, rather you than me. Dave. :)
 

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
SMS receiver card reader

Sorry i cant help, not sure if another member can, maybe.
Your link does not work for me, iam getting Not Found

The requested URL /en/products/gsm...p_ac=show&p=93 was not found on this server.
Apache/2.2.3 (Debian) PHP/5.2.0-8+etch16 Server at www.telit.com Port 80
Good luck with it anyway. Dave. :)

http://www.telit.com/

That bit of the address works.
 
Last edited:
Top