Connect with us

Sony SLV920HF Help

Discussion in 'Electronic Repair' started by gtom03, Apr 26, 2007.

Scroll to continue with content
  1. gtom03

    gtom03 Guest

    I have a Sony SLV920HF VCR that has a cracked gear. The gear drives the
    posts that wrap the tape around the drum. I need to get access to the
    bottom of the transport to replace it.

    Do I need to remove the transport from the top? Or should I try and
    remove the circuit board below it, from the bottom?

    TIA
     
  2. Most Sony's I've seen with this mech, the circuit board is removed from
    under neath - but on this one, a center drive model, the mech is removed
    from the top. Other stuff needs to come off first, as I recall. The front
    panel circuit boards, the tape preamp board, the cassette carriage, maybe
    some other stuff.

    Mark Z.
     
  3. I hope you get raped in prison.
     
  4. gtom03

    gtom03 Guest

    Thanks for the tip!

    gtom03
     
  5. Well, there's one for the old "blocked senders list" ...

    mz
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-