Maker Pro
Maker Pro

Sony KV-27S22 : Sound, but not picture.

J

Jason

Jan 1, 1970
0
I have a 27" Sony KV-27S22. When I turn it on I get sound, but no
picture at all. The little red led beside the stanby/timer blinks
continuously. I really hate to throw this tv out, as it has a great
picture. Any suggestions as to what to check?

Thanks
Jason
 
F

Forza Azzurri

Jan 1, 1970
0
I have the same problem only if I turn it on and off a few times
eventually it stays on. Any news on this from anybody.

Greatly appreciated
I have a 27" Sony KV-27S22. When I turn it on I get sound, but no
picture at all. The little red led beside the stanby/timer blinks
continuously. I really hate to throw this tv out, as it has a great
picture. Any suggestions as to what to check?

Thanks
Jason

--
'''
(0 0)
+----oOO----(_)----------+
| Preserving Azzurri |
| Calcio History |
| http://forzaazzurri.com|
+-----------------oOO----+
|__|__|
|| ||
ooO Ooo
 
J

Jerry G.

Jan 1, 1970
0
This is usually caused by a failure in the horizontal output stage. You
will have to give this out for service. This type of fault condition can
get very complex, especialy for the hobbiest.

If you are not trained in TV service, and have the proper tools and
setup to do this type of work, you would be best off to give the set out
for service. There are also many safety issues when working on TV sets.

--

Jerry G.
======

I have a 27" Sony KV-27S22. When I turn it on I get sound, but no
picture at all. The little red led beside the stanby/timer blinks
continuously. I really hate to throw this tv out, as it has a great
picture. Any suggestions as to what to check?

Thanks
Jason
 
Top