Connect with us

Sony KD32FS170

Discussion in 'Electronic Repair' started by Charlie East, Jun 2, 2007.

Scroll to continue with content
  1. Charlie East

    Charlie East Guest

    Unit will not come on, Blink code is 5
    Dont have a schematic, Going to look at it next week, Anyone familiar with
    this one?
  2. Guest

    Not sure, not got the codes, but cud fing out, Susupect this mey be a
    frame fault.
  3. Art

    Art Guest

    KV32FS120 five [5] blink code is IKB Protect. Sony datum 'IC001 defect on M
    Board, G2 Defect or mis-adjusted', or anything that may affect these two
    specific circuit areas. Good luck on that BA-6 Chassis.
  4. Charlie East

    Charlie East Guest

    I got to look at the set, The blink code is 5, The high voltage never tries
    to come up so I guess that would affect the G2 voltage to give the IKB
    fault.I have 0 volts on the collector of the H output trans. I was not able
    to trace it back to P/S. Very limited work space in the home, so I told
    customer it has to come to the shop for troubleshooting., Have to get help
    to bring that big thing in

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Electronics Point Logo
Continue to site
Quote of the day