Connect with us

Sony Handycam CCD-TRV65 will not power up

Discussion in 'Electronic Repair' started by Norm, Aug 22, 2003.

Scroll to continue with content
  1. Norm

    Norm Guest

    My Sony Handycam CCD-TRV65 (Hi8) camcorder will not power up with the
    battery pack or with the power adapter. I swapped out the battery
    pack and the adapter but it did not help. The camera worked fine the
    last time I used it and it has been sitting in a cabinet for about six
    months. It hasn't left the house in several years so I don't think
    it's a problem with any foreign matter getting inside. The battery
    contacts and DC IN contacts are clean.

    Any ideas would be helpful. I'm an electrical engineer and I have a
    scope but I'm not sure where to start. I don't want to crack open the
    case unless I know what to expect.

    thanks,
    Norm
     
  2. Andre

    Andre Guest

    Just a thought, but a simple adjustable DC supply hooked up to the
    battery contacts (on the camera) should make it power up . Set the
    voltage to whatever it says on the battery (7.2V, etc) .

    Make sure to get it round the right way !!!!!

    <include disclaimer.h>
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-