Maker Pro
Maker Pro

Sony ccd trv37 ejects tape

W

waybel

Jan 1, 1970
0
I bought a used sony Camera from a lady on the net,who said the camera
worked fine until a tape got stuck in it.When i got it the tape door was
open and when i close it the mechanism works fine goes into its slot.It
then sits there for a few seconds and out it comes again.Everything else on
the camera works fine.No error codes.Eject button works .I tried it with a
tape and no tape,still does the same.Any ideas what to look for guys?Thanks
 
M

Mistress

Jan 1, 1970
0
(Obvious, but check again: Make sure there are no bits of tape still
inside.)

If the take-up reel turning? Check belts. It *could* be that your stuck
tape was caused by a failed take-up. The proc will sense the turning of the
take-up reel via optical or hall effect sensors under the spindle. No
turnee - eject tape.
 
Top