Connect with us

Solve this please

Discussion in 'Power Electronics' started by Kamal1300, Aug 14, 2021.

Scroll to continue with content
  1. Kamal1300

    Kamal1300

    2
    0
    Aug 14, 2021
    Hello I’m Kamal from Beiruit Lebanon coming here for some assistance. I have a TP-Link router that stopped working after I accidentally used a
    24V 0.38A power adapter when I should of used the 12V 1.5A adapter instead. The router lights now flicker on and off and then gradually fades away. I am good with micro soldering but don’t have much knowledge in chips transistors capacitors. Can anyone tell me what likely needs replaced or how to diagnose. I do hear some static coming near one of the Capacitors each time the flickering occurs. The average monthly income here is 60$US and I can’t afford to purchase a new router for $45. I’m really upset about this honest mistake and hope someone here can help bring it back to life. My prayers go out to those who can please chime in and take some time to help me figure out what needs replacing
     

    Attached Files:

  2. Kamal1300

    Kamal1300

    2
    0
    Aug 14, 2021
    The only feature that seems to work on my multimeter is the beep setting. Is there anyone who can please help me I’m desperate
     
  3. Kabelsalat

    Kabelsalat

    165
    29
    Jul 5, 2011
    Well - problem is it's pretty much impossible to tell without a schematic. You need to be able to know what components are feed directly from DC source, and then make an assessment on whether each of those would be able to stay alive through the double voltage.
    And of course there would be two different cases depending whether the unit have it's own voltage regulator or not. From your images I don't think it have.

    Most probably one or more of the chips are fried.
     
  4. Bluejets

    Bluejets

    5,001
    1,050
    Oct 5, 2014
    Possibly took out a few electrolytics in the power supply as well.
     
  5. narkeleptk

    narkeleptk

    46
    12
    Oct 3, 2019
    24v .38a is not a whole lot. I'm surprised it did any damage.
    I'd Focus on this area in picture. Should be pretty simple to check these things with the help of youtube.
    Especially D1, D2 and U1. Maybe Q1. If all of these are ok then your probably going to have trouble tracking it down.
    Clipboard01.jpg
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-