Connect with us

SOLUTION: Viewsonic OSD lock and how to clear

Discussion in 'Electronic Repair' started by JW, Jan 23, 2007.

Scroll to continue with content
  1. JW

    JW Guest

    Found this out with a little experimentation on an RMA return.

    1. Disconnect power cord.
    2. Press and Hold button 1.
    3. Plug power cord back in.
    4. If necessary, press power button while still holding button 1.

    OSD lock should now be cleared.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day