Connect with us

solution of Waveguide selection

Discussion in 'Electronics Homework Help' started by Alay Parikh, Jan 10, 2017.

Scroll to continue with content
  1. Alay Parikh

    Alay Parikh

    3
    0
    Jan 10, 2017
    How to solve waveguide selection problem?
     
  2. chopnhack

    chopnhack

    1,573
    352
    Apr 28, 2014
  3. Alay Parikh

    Alay Parikh

    3
    0
    Jan 10, 2017
    Thank you. I appreciate for your help.
    I have already gone through that link,but seems like there is no more detail on internet for this perticular topic. I wanted to check about the procedure and how we could reach to the result.
     
  4. davenn

    davenn Moderator

    13,648
    1,884
    Sep 5, 2009
    way too little information

    what frequency ?
     
  5. davenn

    davenn Moderator

    13,648
    1,884
    Sep 5, 2009
    is this really homework or a general call for information ?

    do you actually have a job that you need to use waveguide ?
     
  6. Alay Parikh

    Alay Parikh

    3
    0
    Jan 10, 2017
    This is my homework. Since I could not find the right answer so I asked this question. The question was write detailed step by step instructions on how to solve waveguide selection problem. what is the purpose and how to proceed? what results you reach and how.
     
  7. davenn

    davenn Moderator

    13,648
    1,884
    Sep 5, 2009
    OK I will move thread to homework section
     
  8. chopnhack

    chopnhack

    1,573
    352
    Apr 28, 2014
    You were given pretty explicit instructions on what was desired.

    Essentially the teacher is asking you to research and understand the principals of waveguide, selection of spectrum and why, the technology used to 'form' the beam, the potential savings when used correctly,etc. I would approach this as if you were the systems engineer tasked with this problem and write up a proposal and anticipated results as if you were to present them to your superior at work.
     
    davenn likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-