Connect with us

Solution-Design for NC contact - Air-condition soft on/off

Discussion in 'General Electronics Discussion' started by Aerorihr, Apr 29, 2017.

Scroll to continue with content
  1. Aerorihr

    Aerorihr

    1
    0
    Apr 29, 2017
    Hi all,


    any help or solution for my "problem" is good, i am trying to place NC - magnetic contact on my windows/doors and switch off (soft solution) my Air Condition.

    in attach is optional communication kit from Fujitsu.

    NC contact is on CNA01 - B3B-XH-AM (EX IN)

    Pic 1 is indoor unit - main PCB and connection for additional card - communication kit is on CN2.


    THX for any suggestion.


    https://ibb.co/nBEvgQ

    https://ibb.co/gzET1Q
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-