Connect with us

solder question.

Discussion in 'Electronic Basics' started by jim, Dec 11, 2003.

Scroll to continue with content
  1. jim

    jim Guest

    I've just received some soic to dip adapters I had sent away for
    and didn't realize just how small the pins were on the soic IC's. Can
    anyone give any advice on what type of iron,temps and solder size I
    should use to place these soic IC's onto the DIP adapters? The
    equipment I have now is way to bulky for this fine work I appreciate
    any help I could get. Thanks again. jm
     
  2. I can't answer those questions, but I will advise you to have plenty of
    desoldering braid sitting around. you'll probably find it invaluable.

    --Russell
     
  3. KP

    KP Guest

    you need miniature soldering iron, Maplins have some
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-