Connect with us

SMPS

Discussion in 'Electronic Basics' started by yuvraj, Dec 24, 2005.

Scroll to continue with content
  1. yuvraj

    yuvraj Guest

    DEAR FRNDS

    I M SERVICE AND DEVELOPMENT ENGG IN ONE INSTRUMENTATAION CO
    I WANT TO DESIGN A 385V,200W, SMPS. SO WHICH PFC IC SHUD I SELCET FO
    THIS DESIGN, MAX OUTPUT CURRENT IS 1.5A. I M PLANNIGN TO US
    ML4821.BUT IF THERE IS BETTER OPTION WITH DESIGN NOTES PLEASE SUGGE
    ME

    SO WHAT CARE SHOULD BE TAKEN DURING PCB LAYOUT, I WILL PREFER 4 LAYE
    BOARD, 70 MICRON, IN WHICH SECOND AND THIRD PLANE WILL B
    COMMON(GROUND)

    PLEASE ADVISE ME THE THE WAY BY WHICH I CAN MINIMIZE EMI FOR GOO
    STABILITY

    WAITING FOR YOUR POSTIVE REPLY

    YUVRA
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-