Connect with us

SMD Part Marking Code help, I have run out of ideas!

Discussion in 'Datasheets, Manuals and Component Identification' started by KraigK, Feb 8, 2011.

Scroll to continue with content
  1. KraigK

    KraigK

    3
    0
    Feb 8, 2011
    I have a part that I know quite a bit about but just can't locate the datasheet. It is a 5-pin Op-Amp or Comparator, rail-to-rail, SOT-23 package or similar.

    +V is 5V
    -V is GND

    A couple of chips are marked BCUU and another is BCWV so I figure BC is the base and the other two are date codes but I just can't locate this thing. It should not be an obsolete part.

    Thanks for the help!
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,497
    2,839
    Jan 21, 2010
    BCUU and BCWV may be SMT codes.

    They're not unique, and may not have the meaning you think they have.

    Check an SMD codebook. (you did read the sticky, right?) I checked one and didn't find it.
     
  3. shrtrnd

    shrtrnd

    3,826
    520
    Jan 15, 2010
    A lot of times when I get stuck on identifying parts, you have to start looking at the manufacturer of the product, and see if you can narrow-down what manufacturers supply the parts to that mfgr. Sometimes it's easier, when you can WHO made the
    electronic part.
     
  4. KraigK

    KraigK

    3
    0
    Feb 8, 2011
    Yep, I did read it, I did most of that one day last for 8 hours and just kept getting dead ends. I'll check it again, maybe there's a resource I missed.

    This is the last part I need to ID!!!
     
  5. KraigK

    KraigK

    3
    0
    Feb 8, 2011
    Took some better measurements, looks like a SOT-363 package.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-