Maker Pro
Maker Pro

SMD desoldering tweezers

N

N_Cook

Jan 1, 1970
0
For simple 2 land devices like Rs and Cs , apply the tweezers across the
long axis or short axis? Flat/flat and so good metal/metal contacts
generally if shortwise application but full-on solder contact lengthwise
although spherical/flat contacts until initial solder melt. Assuming the
tweezer ends are centrally relieved for the shortwise situation to avoid
contacting the "active" section of the SMD
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
I think you know what you thought you said, but did you know what I think you said is
not what you said you think we know.
 
Top