Connect with us

SMD code "AL207", reference?

Discussion in 'Electronic Repair' started by cLx, Jan 28, 2013.

Scroll to continue with content
  1. cLx

    cLx Guest


    I've looked for, but not found.
    Is someone knowing what is the reference of a tiny 6 pins SMD chip
    marked "AL207"?
  2. N_Cook

    N_Cook Guest

    Try "contained within" search on
  3. cLx

    cLx Guest

    It dosn't work (it's a tiny boost - or step up - dc dc converter's),
    because since it's a little surface mount chip, what is marked on is a
    sort of code which could be not unique at all, not the chip's name.
  4. Archon

    Archon Guest


    6 pin Dc/DC converter

  5. Guest

    If it's not the XCL207 mentioned by Archon, check the various 'SMD
    Marking code' lists.

  6. cLx

    cLx Guest

    Could be that, but sadly no because it has no internal inductor, and
    it's a step-up (the XCL207 is for step-down).
  7. cLx

    cLx Guest

    Tried that, but I don't find it on whatever list I knew or with google...
  8. Archon

    Archon Guest

    Looking at the data sheet for that part it seems the smd package
    labeling bears no resemblance to chip number anyway, so you are going to
    have to get more info, actual package size type may narrow it down,
    some idea of its input voltage and expected output voltage. Whats the
    device its in? JC
  9. cLx

    cLx Guest

    It's the chip on this board :
  10. Guest

  11. cLx

    cLx Guest

    It was close, but there is a external diode and the pinouts dosn't
    correspond. The component i'm looking for have :
    SW -| |- ??? (to GND by 10k resistor)
    GND -| |- Vin or enable
    FB -|_____|- enable or Vin
  12. Archon

    Archon Guest

    On 31/01/2013 1>
    So the chip is the one on the board

    priced at $2.59 for the board, so i guess you are not trying to repair a
    $2.59 board, so why not buy the cheapo board and take the chip? JC
  13. cLx

    cLx Guest

    Because I wanted to read the real datasheet (and know the exacts
    characteristics) before using it in my projects...
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day