Connect with us

SMD capacitor

Discussion in 'Datasheets, Manuals and Component Identification' started by C.S.KWONG, Feb 17, 2012.

Scroll to continue with content
  1. C.S.KWONG

    C.S.KWONG

    1
    0
    Feb 17, 2012
    i have no idea about this part, code mark: 102k 7244, but this value was not exist in SMT tantalum cap, some one help?

    thank you.
     

    Attached Files:

  2. davenn

    davenn Moderator

    13,584
    1,869
    Sep 5, 2009
    hi there
    welcome to the forums :)

    if it is a capacitor then 102k would indicate 0.001uF and prob of polyester or mylar type

    are you sure its a cap? do markings on the PCB confirm that?
    if not, then it may be an inductor

    cheers
    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-