Connect with us

Small quantity double sided PCB manufacturing

Discussion in 'Hobby Electronics' started by Kutaj Vamor, Sep 28, 2005.

Scroll to continue with content
  1. Kutaj Vamor

    Kutaj Vamor Guest

    We are a group of uni students with limited experience in electronics. As a
    part of our uni projects we have designed some electronic circuits Altium's
    DXP. The circuits contains various integrated circuits in SOIC and DIP
    packages and some passive componets including connectors. We also designed
    printed circuit board (PCB) art works for our boards. Total surface area of
    our boards is approximatelly 20x20cm.

    Where in Australia (Sydney) we can order the double sided PCB (with through
    whole plated) manufactured for us in low quantities (one or two) with price
    tag suitable for uni students?

    Thanks in advance.
  2. swanny

    swanny Guest

    You don't give any details of your PCB manufacturing spec. Smallest
    track width, spacing, hole size range, via size etc.

    You could try BEC ( who are in Queensland and
    offer a panel-based prototyping service. I've had good quality results
    from them in the past.

    I'd guess that a 270mm x 420mm panel of dspth boards with no s/s or
    overlay would be around $350.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day