Connect with us

SLV 555 Sony VCR!!

Discussion in 'Electronic Repair' started by Rono, May 28, 2005.

Scroll to continue with content
  1. Rono

    Rono Guest

    Have two of the same model. Mode switch redone, timing reset,
    worn gears replaced. Plug it in, unit "resets" timing by making a
    short "attemt to reset timing". Bad load caddy sensor? Rono.
     
  2. Guest

    Rono:
    Could be the cassette tray timing but more likely the mode switch is
    not orientated correctly or the gears are not aligned properly.
    Since you have two machines you can use the one that you have not
    "fixed" as a guide to line things up.
    electricitym
     
  3. Guest

    Rono:
    Make certain that the center IR LED is emitting and that the BOT and
    EOT sensors are working. If the cassette tray is not fully "up" then
    the mechanism will try to load the cassette. Use the 2nd machine that
    you have not yet "fixed" as a guide.
    electricitym
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-