Connect with us

Simulating Radio Frequency signal using Wireless Networking Products

Discussion in 'General Electronics' started by [email protected], Jun 28, 2004.

Scroll to continue with content
  1. Guest

    Idea: write a piece of software that can simulate FM radio
    transmission on the 2.4GHz signal of Wireless Networking Products.

    Problem: Is it possible? Where do I start?

    How you can help: lets start with, "is it possible".

    Background: I'm an electrical engineering student and I am a geek. I
    was thinking I could install a laptop in my car and make my own
    "in-car dvd player", but I would want to be able to use the speaker
    system in my car to play the audio. And instead of having a separate
    transmitter in addition to the wireless card I would have, I thought I
    might go about through this route. At the very least, I would built my
    own transmitter, but I'll toss this out there and see what kind of
    response I get...


Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day