Connect with us

Simon 3 Problem

Discussion in 'Security Alarms' started by Polyfusion, Oct 25, 2003.

Scroll to continue with content
  1. Polyfusion

    Polyfusion Guest

    I installed a Simon 3 last weekend (Sunday), phone, backup battery and
    power (no sensors). Everything seem to be working fine and it prompted
    "Hello the system is OK", I even tested out some sensors. Then on
    Tuesday morning it started beeping every few seconds. I think I pushed
    the System Status button and it stopped and didn't think anything of
    it. Today (Saturday) I was going to hook up a few sensors and opened
    up the panel waiting to hear "Enter Pass Code" and the panel did not
    say anything. Now the panel appears not to light up or prompt any
    messages. I checked the outlet its plugged into and there's power. Did
    the system power itself down or something. Now my phone doesn't work
    either. I disconnected the Battery and power and then reinstalled
    everything and no "Hello the system is OK". Please Help
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day