Connect with us

Siemens Gigaset 2415 question

Discussion in 'Electronic Repair' started by parallax, Apr 6, 2006.

Scroll to continue with content
  1. parallax

    parallax Guest

    Hi,
    I have a Gigaset 2415 as well as one Siemens 242 unit. They are both
    2.4 Ghz.
    I tried to make 242 work with 2415 as an add on unit, but it can't find
    the channel.
    Is there a way to make them work together?
    Thanks
     
  2. Scott Lane

    Scott Lane Guest

    Go to Siemens.com and download the owner manual for the 2415. Follow the
    directions to register a handset. You may want to de-register the handset
    before you try and register it on the 2415. Good luck. Scott
     
  3. parallax

    parallax Guest

    The manual says to turn off the registered unit and to place the other
    one close by.
    I did it, and the 242 unit displays "Out of range" which means it
    cannot "see" the base signal. Siemens 242 does not have the extensive
    menu that 2415 has. Maybe they are not compatible...
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-