Maker Pro
Maker Pro

shielded cable helpful here?

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
the clampon chokes are designed to go right around multple wire cables

the pic of ferrite beads I showed above are really tiny, they go over the individual conductors within a cable .... yes you would have to unsolder the wires from the plug/socket slide the bead on and resolder the wire back on.


Dave
 

drmax

Dec 30, 2013
10
Joined
Dec 30, 2013
Messages
10
the clampon chokes are designed to go right around multple wire cables

the pic of ferrite beads I showed above are really tiny, they go over the individual conductors within a cable .... yes you would have to unsolder the wires from the plug/socket slide the bead on and resolder the wire back on.


Dave
Thx Dave. I'm going to try the clamp on 1st, as they are available at R/S. I may also solder in a cap in another device. (a cig lighter plug extension) I post a photo up above somewhere. Could you specify which cap I should go with? Someone said either a .1 or .01. I do know know the difference. The extensions has 3 cig sockets and 1 usb. I'm assuming a cap would still work as a filter, on this device. Thank you and Happy New Year to all of you. DM
 
Top