Connect with us

Sharp TV / VCR Remote Codes - GE Universal Remote

Discussion in 'Electronic Repair' started by jJim McLaughlin, Jul 15, 2007.

Scroll to continue with content
  1. Not sure if this is the best group for this question -- if, not, my
    apologies and
    my humble request for pointers to a more appropriate group.

    Sharp 13VT-J100 combinationTV/VCR unit.

    Remote is lost. I have three of these TV / VCR units and have remotes
    for only two.

    Bought a "universal" remote, a GE RM24906. Fresh batteries.

    Tried to program the GE Universal for the Sharp TV , going through all
    the steps.
    GE unit lists possible codes of 004; 006;, 009; 020; 063; 079; 095; 122;
    123;
    226 and 229.

    None worked. Zero functions.

    Programed the GE Universal to run a Sylvania TV for which I had a known
    "good" code. GE Universal ran the Sylvania unit flawlessly.

    To me this says the GE universal is functioning.

    Used one of the original remotes from one of the other Sharp units on
    the Sharp
    unit I need the replacement remte for. The Sharp remote runs the Sharp
    TV / VCR
    flawlessly. This tells me the Sharp TV/VCR is working.

    But in no way can I get the blankety blank GE universal remote pogrammed to
    run the blankety blank Sharp TV/ VCR unit.

    Any body out there got any ideas?

    Thank you.
     
  2. JR North

    JR North Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-