Connect with us

Sharp R-84ST microwave

Discussion in 'Electronic Repair' started by Bram Stolk, Dec 27, 2003.

Scroll to continue with content
  1. Bram Stolk

    Bram Stolk Guest

    I have this Sharp R-84ST microwave, it has the problem in the LCD display as
    the A/N 8 segment characters are only displaying the lower-halves making it
    very hard to understand what the cooker is telling ?

    The LED backlighting is OK and I found no erratic connections or
    solderjoints..I have heard that this is a common problem to SHARP's
    Is there any chance to fix-it ? other than ordering a new CCA ?

    Mr HAWK Sr...If it flies, it dies...Working from location HEEMSKERK, the
  2. Art

    Art Guest

    My experience, unless it is poor solder connections on the controller, is to
    get a complete item via Sharp. This is a common problem with their micro
    controllers here in US.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day