Connect with us

Servo motors, using photoresister

Discussion in 'Sensors and Actuators' started by Tom elec, Feb 4, 2018.

Scroll to continue with content
  1. Tom elec

    Tom elec

    2
    0
    Feb 4, 2018
    Working on a project that I followed the schematics exactly; the servo worked for a second, then stopped. The photoresisters never worked.

    My first question: does the Arduino need to be programmed for it to work? And can I use a 2 wire motor with the photoresistors.

    I would rather use a motor that can continually spin and have the light sensors stop it. Possible?
     
  2. Bluejets

    Bluejets

    4,004
    828
    Oct 5, 2014
    Yes, Arduino needs to be programmed. Also the motor will need to be driven via mosfet, relay or similar. Possible to do without a microcontroller, however, the micro makes adding other features later much easier. Best to post copies of what you have so we can see and make an educated appraisal rather than a stab in the dark.
     
  3. Tom elec

    Tom elec

    2
    0
    Feb 4, 2018
    Thanks. Do you happen to know how I can get one on one help putting this project together. Have you heard of services like this?
     
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,363
    2,758
    Jan 21, 2010
    Yes, the service is called google. See also YouTube and this forum.

    However you'll have to start (if you sell help here) by providing links to the web page(s) you got your design from, and probably pictures of your construction.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-