Connect with us

Service mode on Panasonic TX-28SK!C

Reply to Thread

Discussion in 'Electronic Repair' started by Danijel, Mar 11, 2005.

Scroll to continue with content
  1. Mar 11, 2005 #1
    Danijel

    Danijel Guest

    How do I enter the service mode on Panasonic TX-28SK!C?

    Thanx!
     
  2. Mar 11, 2005 #2
    Danijel

    Danijel Guest

    How do I enter the service mode on Panasonic TX-28SK1C?

    Thanx!
     
  3. Mar 11, 2005 #3
    sofie

    sofie Guest

    It depends on what you want to adjust????
    --- - --- - - - - - - - -
     
  4. Mar 14, 2005 #4
    Danijel

    Danijel Guest

    I want to adjust vertical
     
  5. Mar 14, 2005 #5
    sofie

    sofie Guest

    Danijel:
    Well BEFORE you try to adjust anything in the service menu you should first
    attempt to repair any possible faults with the vertical deflection area of
    the circuitry..... most likely faults causing vertical size problems are
    out of tolerance, dried up, or high ESR electrolytics ... and cracked, dry,
    cold or faulty solder joints in and around the vertical output circuitry.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. service mode on Panasonic tx-32pk25

  2. Panasonic TX-32PK25D Service Mode

  3. Panasonic TX-29AL10P Service mode - defaults

  4. Panasonic TX-28 W1 Service Mode

  5. Panasonic 50LC13 I2C service mode

  6. Panasonic PV-27DF64 "service mode"?

  7. Panasonic PV-DF273 service mode

  8. Help on Service Mode

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-