K
K.S.
- Jan 1, 1970
- 0
Hey-
Subject says pretty much all.
Is servicemanuals.net my only choice?
No sound or it's low/scratchy, and occasionally pops. Right now, I've
got sound routed from the cable box to an old boom box. I'm about to
buy a TDA1524A chip, as there is low level input there, but no output
(and it's hot).
I was going to replace some small electrolytics on the inputs to this
chip also.
Thought some schematics might help if this isn't the problem.
Thanks-
Kerry
Subject says pretty much all.
Is servicemanuals.net my only choice?
No sound or it's low/scratchy, and occasionally pops. Right now, I've
got sound routed from the cable box to an old boom box. I'm about to
buy a TDA1524A chip, as there is low level input there, but no output
(and it's hot).
I was going to replace some small electrolytics on the inputs to this
chip also.
Thought some schematics might help if this isn't the problem.
Thanks-
Kerry