Connect with us

Service Manual for Danby DAC6003D Window Air Conditioner?

Discussion in 'Electronic Repair' started by Ben Stephenson, Jun 23, 2005.

  1. Hello:

    Does anyone happen to know where I might be able to find a service manual
    for one of these guys? Or if you happen to have one could someone tell me
    what error code "En" on the LED display is trying to tell me? Any
    assistance would be appreciated.

    Thanks,

    Ben
    ben \at symbol\ csd /dot/ uwo /dot/ ca
     
  2. Is it in energy save mode? What are the symptoms leading you to believe
    there is a problem with the A/C?
     
  3. Ken Weitzel

    Ken Weitzel Guest

    Hi Ben...

    Here you go

    http://www.danby.com/en/productManuals.asp

    Take care.

    Ken
     
  4. Hello:

    This problem is occuring when I start up the air conditioner. The normal
    behaviour when I hit the power button would be for it to run the fan on high
    speed with the temperature set to 72. However, the new behaviour is for me
    to hit the power button, then have a ~4 second delay where nothing appears
    to happen except that the 72 shows up on the display (but no fans/compressor
    start up) and then to start flashing the code "En" on the LED display. I
    know from the user manual that E1 indicates that it is time to clean the air
    filter so I suspect that the n is just indicating a different error.
    Unfortunately the user manual doesn't tell me what it is :( The problem is
    somewhat intermitent in that sometimes the air conditioner will simply not
    startup as indicated above and sometimes it will run for several minutes and
    then all fans/compressor will stop and the error message will appear.

    Any thoughts?

    Thanks,

    Ben
     
  5. Thanks for your response. Unfortunately this gives me the user manual
    (which I already have) and doesn't include a list of the error codes. What
    I'm looking for is a service manual that a tech would use to guide a repair
    of the unit.

    Thanks,

    Ben
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-