Connect with us

server power supply

Discussion in 'Troubleshooting and Repair' started by wijay, Aug 19, 2013.

Scroll to continue with content
  1. wijay


    Aug 19, 2013
    I have a server power supply ,which iwant to use as a bench supply .I dont know which pins to be short to start the supply .Roal electronics model 136. P/N 11k0802.

    I have an IBM server power supply ,ROAL MODEL 136 ,which I want to use as a bench power supply.Anybody can help which pins to be jumpered to start the supply.
    Last edited by a moderator: Aug 22, 2013
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    No Idea.

    Do you have one? Are you prepared to take it apart to try to find out?

    Can you post some pictures of the connectors it has?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Electronics Point Logo
Continue to site
Quote of the day