Connect with us

Serial data decoder using Arduino Uno

Reply to Thread

Discussion in 'Microcontrollers, Programming and IoT' started by Rabiya, Feb 20, 2017.

Scroll to continue with content
  1. Feb 20, 2017 #1
    Rabiya

    Rabiya

    2
    0
    Feb 20, 2017
    I've been using ATmega328. I need to serially recieve data of upto 16 bits (along with latch pulse and clock pulse) and based on this data, the microcontroller needs to give a specific output. For example, if the input serial data is 0001, the microcontroller should interpret it and generate a 5V pulse of certain length as an output. There are several modes which need to be selected based on the serial data. How do I program an Arduino to do this?
    (Particularly how do I use the USART to do this?)
     
    Last edited: Feb 20, 2017
  2. Feb 20, 2017 #2
    Harald Kapp

    Harald Kapp Moderator Moderator

    11,281
    2,583
    Nov 17, 2011
    Which serial data format do you use? UART, SPI, I²C, ...?
     
  3. Feb 20, 2017 #3
    Rabiya

    Rabiya

    2
    0
    Feb 20, 2017
    USART
     
  4. Feb 20, 2017 #4
    Harald Kapp

    Harald Kapp Moderator Moderator

    11,281
    2,583
    Nov 17, 2011
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Arduino UNO Serial Question

  2. Charlieplexing using the Arduino Uno?

  3. IR controlled DC motors using arduino uno

  4. Arduino uno board crystal

  5. 8051 to arduino uno

  6. eBay Arduino Uno Clones

  7. Arduino Uno Project Help

  8. Arduino Uno R3 or Arduino Mega 2560?

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-