Connect with us

sequential circuit mod 10 synchronous down counter help

Discussion in 'General Electronics Discussion' started by Francois Black, Mar 22, 2015.

Scroll to continue with content
  1. Francois Black

    Francois Black

    Mar 22, 2015
    Hi i need some assistance with a mod 10 synchronous down counter using jk flip flops as when everything is connected i get numbered values that don't make sense.
    First thing i did was find my next states and then used the transition diagram to find the values of my j,k's. You can see my next states and my simplification for my jk's in the picture below. I triple checked my transition simplification so im pretty sure its not the problem.
    I think that the problem is that im not sure how to wire everything together. The way i did it was i built it was the same way i successfully build a synchronous mod 10 up counter but changed my next state values which gave me different transition tables.
    If anyone could help me with this I would deeply appreciate it
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day