Connect with us

Sending Commands to Bluetooth Device

Discussion in 'Radio and Wireless' started by Aeolos, Dec 5, 2011.

Scroll to continue with content
  1. Aeolos

    Aeolos

    1
    0
    Dec 5, 2011
    Hi,

    I have a query regarding communicating with a bluetooth gps (keyring) to re-configure it.

    The reason is that it automatically goes to sleep after 5 minutes if no communication with the device is present. Normally this would be ok, but I am using it with a Psion handheld that will go to sleep itself after 10 mins. which means if I leave both for more that 9 minutes I have to start up the GPS again. I am sure there must be some application that could send NMEA data, and if so what commands would need to be sent.

    The device is a Gosget 369

    Any advice would be greatly appreciated.

    Jimmy
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-