Connect with us

Seleco Tv Fault

Discussion in 'Troubleshooting and Repair' started by marcgal, Jul 1, 2010.

Scroll to continue with content
  1. marcgal


    Jul 1, 2010
    First of all hello to all i'm new on these forums hope will learn and help someone.

    I have a Seleco Tv (Seleco-FPC2001-Twist) which at first was arching from the FBT and since i didn't have time i left it working (was working fine apart from the noise of the arching from time to time). After some time the TV lost picture and only a grey screen with white lines appeared, but i managed to replaced a fuse resistor from the FBT output and now no picture but sound is ok....

    I was wondering if this is a problem related to the FBT or else maybe something else.

    Thanks again
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day