Connect with us

Seiko Graphic LCD pinout needed

Discussion in 'Electronic Components' started by Dr.Eetn, Aug 2, 2004.

Scroll to continue with content
  1. Dr.Eetn

    Dr.Eetn Guest

    Hi, I've a Seiko Graphical LCD here, but I'd like to know the pinout
    of its controller.
    There are a lot of numbers on the LCD, but don't find what I need with
    any of the numbers.
    First of all I got some possible model numbers: SII YWP-C and C397005
    Then I got some chip-numbers: NEC C1100G, C324G and (with the mark of
    Seiko) 9150 C06

    The LCD is about 400 x 300 pixels.
    I don't even know what it used to be, but this LCD is too great to
    ignore...
    So please, help me find this pinout.
    Thank you very much !
    Greets
     
  2. Franc Zabkar

    Franc Zabkar Guest

    uPC324G = LM324 quad op amp
    http://www.necel.com/cgi-bin/nesdis/dl_docpdf.cgi?lang=E&litcode=G11763EJ4V0DS00
    http://www.necel.com/nesdis/image/G11763EJ4V0DS00.pdf

    uPC1100G = Switching regulator
    http://www.necel.com/cgi-bin/nesdis/dl_docpdf.cgi?lang=E&litcode=IC-2122A
    http://www.necel.com/nesdis/image/IC-2122A.pdf
    9150 may be a YYWW date code.


    - Franc Zabkar
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-