C
Chad Entringer
- Jan 1, 1970
- 0
looking for sechematics or insight.
no anode high voltage no deflection chatter.
r407 bad solder joint resistor replaced with 1.8 was reading 1.4k
reading 80 on input of r407 4v on out.
HOT not active reading 144 on collector.
possible horizontal drive problem?
new q401 no change.
thanks , Chad
www.arcadecup.com
no anode high voltage no deflection chatter.
r407 bad solder joint resistor replaced with 1.8 was reading 1.4k
reading 80 on input of r407 4v on out.
HOT not active reading 144 on collector.
possible horizontal drive problem?
new q401 no change.
thanks , Chad
www.arcadecup.com