Connect with us

Seeking a cheap simple wire-wrap wire stripper

Discussion in 'Misc Electronics' started by Matt, Feb 25, 2004.

Scroll to continue with content
  1. Matt

    Matt Guest


    Around 1986 I bought at Radio Shack a little wire stripper for wire wrap

    It cost about a dollar and was flat and about 3/4" square. It was
    basically a flat blade somewhat like a razor blade inside a flat metal

    Anybody know where I can find something like that nowadays?

  2. Bill Karkula

    Bill Karkula Guest

    I have one - it came inside the wirewrap tool handle that I bought from RS
    several years ago. Good luck tracking down another (post WTB here or look
    on eBay?)

  3. Wade Hassler

    Wade Hassler Guest

    I've always liked these gadgets:

    .... easy for me to say, since the slump has dropped a lot of them in
    the local surplus stores.

    Wade Hassler
  4. Matt

    Matt Guest

    I don't remember its dimensions exactly, but it was flat, and maybe it
    did come bundled with the little manual wire-wrapping tool that I got at
    RS for around $6.

    The handle of the tool I bought is not hollow though.
  5. Matt

    Matt Guest

    Okay, I looked at the online picture of Radio Shack 276-1570, and it
    looks just like the one I bought. Ha ha. I guess I remembered wrong.
    I just pulled off the end of the handle and found the stripper inside
    where it has been hiding for 18 years.

    The stripper is 1/4" x 1/8" x 1 5/8" and as you say is stowed inside the

  6. Matt

    Matt Guest

    The online part number is 242835. Do you have one of these? Is the
    stripper stored inside the hollow handle of the WW tool?

    It looks like jameco is selling something similar to Radio Shack's Part
    #276-1570, but jameco is charging 2-3 times as much.
  7. Norm Dresner

    Norm Dresner Guest

    I saw a very similar W/W tool with embedded stripper in the Electronics
    Express catalog recently for ~$15.

  8. JeffM

    JeffM Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day