Connect with us

Sears Branded VCR Stuck in "Stop"

Discussion in 'Electronic Repair' started by John Keiser, May 19, 2007.

Scroll to continue with content
  1. John Keiser

    John Keiser Guest

    My 10 year old [rarely used] LXI Model No 850 began to hang on ejecting
    cassettes. [Has auto-load detect mechanism.] I replaced the old, cracked
    drive belt. Loads fine now, tape wraps around head for a few seconds, and
    then cassette goes through ejection sequence. TV display show "Stop" only,
    no picture even when tape fully engaged.
    I know this is a very cheap model but I'd rather fix as its used 6 X a year.
    Does any one have a suggestion as to why this is stuck in "stop"?
    Thank you.
     
  2. John Keiser

    John Keiser Guest

    Answer found in Goldwasser's Repair FAQs:
    I was testing with the lid off and needed to block the stray light.
    All is well
    Thaank you Sam.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-