Connect with us

Scratchbuild 3-ccd camera - need help with video signals

Discussion in 'General Electronics Discussion' started by Winkie, Feb 2, 2013.

Scroll to continue with content
  1. Winkie

    Winkie

    1
    0
    Feb 2, 2013
    Hi all

    I'm a newbie here, and certainly new to anything electronic. I'm building a 3-ccd camera from scratch - in other words, a camera that uses three image sensors to acquire separate data in red, green and blue channels, which are subsequently merged into a colour image.

    I'm fine with the optics, the beam-splitting and the filtering etc. I plan to use (initially) three webcams to collect the separate RGB images.
    My problem is how to combine each of these monochrome video signals (probably via a USB lead) into one colour signal that I can view on a small LCD screen. For the moment, all I want to do is stream and view the images; I'll worry about recording stuff later.

    My initial guess would be to buy an RGB to YUV converter and then go YUV to USB straight into the LCD screen.

    Any ideas would be most welcome.

    Thanks
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-