Maker Pro
Maker Pro

Scott TV shutting down

  • Thread starter Richard Heyduck
  • Start date
R

Richard Heyduck

Jan 1, 1970
0
Our Scott TV (27") is started shutting itself down from time to time.
Though the power is still on, there is no picture or sound. It is
attached to a cable line through a VCR and is just as dead whether
watching cable or a tape. If we turn it off and wait a while, it tends
to start working again.

Any ideas what may be going on?

Thanks!
 
J

john

Jan 1, 1970
0
Pull the chassis out turn it over
get out your Magnifying Glass
and look for Bad dry solder connections.
Resolder all that look suspicious.

kip
 
J

Jerry G.

Jan 1, 1970
0
There are either bad solder connections, or there is a component(s) that has
become thermo sensitive.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
Instruments http://www.zoom-one.com/glgtech.htm
=========================================


Our Scott TV (27") is started shutting itself down from time to time.
Though the power is still on, there is no picture or sound. It is
attached to a cable line through a VCR and is just as dead whether
watching cable or a tape. If we turn it off and wait a while, it tends
to start working again.

Any ideas what may be going on?

Thanks!
 
Top